Corega Headphones BTHS02 User Manual

BTHS02  
Elegant  
Bluetooth Headset  
User Manual  
 
Contents  
BTHS02 User Manual  
1. Before starting......................................................................................... 20  
2. Statements................................................................................................ 21  
3. Product Introduction............................................................................. 22  
4. Quick Start Guide.................................................................................... 24  
5.Wearing Headset..................................................................................... 27  
6. Function Specification.......................................................................... 28  
6.1 Charging the headset..................................................... 28  
6.2 Power On/Off the headset............................................. 29  
6.3 Pairing................................................................................... 29  
6.4 Making Calls........................................................................ 30  
6.5 Redial..................................................................................... 30  
6.6 Voice Dialing....................................................................... 30  
6.7 Answering a call................................................................ 30  
6.8 End a call.............................................................................. 30  
6.9 Reject a call......................................................................... 30  
6.10 Transfer/Switch Calls..................................................... 31  
6.11 Adjust the headset Volume ....................................... 31  
6.12 Mute.................................................................................... 31  
6.13 Connect with a PC or PDA........................................... 31  
7. FAQ............................................................................................................... 32  
8. Compatible Listing................................................................................. 34  
9. Specification..............................................................................................35  
19  
 
Before starting  
1
1. For first time use, it should takes about 4 hours to fully  
charge the battery. Afterward, it takes about 2 hours to fully  
charge. Details please refer to the manual.  
2.This manual was taken bluetooth mobil phone for instance  
for pairing, other bluetooth devices please refer particular  
manual.  
3.You will see [CG-BTHS02] shown on the screen of the  
bluetooth mobil phone or other bluetooth devices when  
you’re pairing. Please select it and enter the password [1234]  
to make sure the pairing successful.  
20  
 
Statements  
BTHS02 User Manual  
2
BQB Statements  
The Bluetooth Qualification information of this product could be referred to  
Bluetooth Identifier B01818.  
FCC Safety Statements  
This device complies with Part 15 of the FCC rules. Operation is subject to the fol-  
lowing two conditions:  
1.This device may not cause harmful interference.  
2.This device must accept any interference received, including interference that  
may cause undesired operation.  
The radiated output power is far below the FCC Radio frequency exposure limits.  
Nevertheless, this device should be used in such a manner that the potential for  
human contact during normal operation is minimized.  
Warning: Changes or modifications made to this equipment not expressly ap-  
proved by the manufacturer. May void the FCC authorization to operate this  
equipment.  
Important. Please note the following:  
This equipment has been tested and found to comply with the limits for a Class  
B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to  
provide reasonable protection against harmful interference in a residential instal-  
lation.This equipment generates, uses and can radiate radio frequency energy and,  
if not installed and used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee that interfer-  
ence will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning  
the equipment off and on, the user is encouraged to try to correct the interference  
by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
Copyright and Trademark Notices  
Products and brand names may be the trademarks or registered trademarks of  
their respective owners.  
21  
 
Product Introduction  
3
corega BTHS02 is an elegant styling bluetooth headset, which can  
pairing with mobile phones, PDA, Desktop PC or notebooks and making  
voice transmission within high distance of 10M.You may use corega  
BTHS02 as wireless microphone when you talking through MSN mes-  
senger/Yahoo messenger or other IM softwares, or listen to the music  
from PC or notebooks.  
3.1 Packing Content  
• Elegant Bluetooth Headset  
• Charger (suitable for Nokia mobilphone)  
• Charger Connector  
• Ear Hook  
• Cloth Bag  
• Strap  
• Ear Sponges  
• Manual  
3.2 Product Features  
• Compatible with Bluetooth 1.1 Standard  
• Fashion and stylish design  
• High voice transmission quality without echo  
• 2 easy wearing ways-direct to wear or wear with earhook  
• Talking time up to 6 hours and standby time up to 160 hours  
• Cover area up to 10m  
• Support [Voice Dailing] and [Transfer/Switch calls] function.  
• Support IM software, ex:MSN Messenger, Skype  
• Low electromagnetic wave for health care  
• Additional strap for wearing on neck  
• Additional pretty bag for protecting the headset.  
22  
 
BTHS02 User Manual  
3.3 Hardware Introduction  
[Front]  
[Back]  
Charging port  
Dial/Answering  
/Reject a call/Voice dialing  
Volume up  
Pairing  
Speaker  
Button  
Button  
Power on/off  
End/Redial a call  
Volume down  
Microphone  
[Ear Hook]  
Adjustable Hook  
23  
 
Quick Start Guide  
4
Charging the headset (while LED is red)  
(Check LED status)  
Charger  
Power  
Supply  
DC Jack Connector  
(Suitable for Nokia Mobilephone)  
Red (Green) LED  
Power on》  
Press and hold the [] button for 4 seconds LED flashes blue light  
for 4 times release the [] button power on successful.  
(Powering on status is LED flashes one time per several seconds)  
Power off》  
Press and hold the [] button for 4 seconds LED flashes red light for  
4 times release the [] button power off successful.  
Pairing with mobilphone》  
Press and hold the [] button for 7 seconds LED flashes blue light  
for 4 times LED flashes red and blue alternatively release the  
[] button follow the mobilphone’s manual for pairing select  
“CG-BTHS02of the listing showed on your mobilphone screen type  
24  
 
BTHS02 User Manual  
password,“1234” pairing successful.  
Make a call》  
Dialing by the mobilphone.  
Redial last call》  
Press and hold the [] button for 3 seconds starting auto dialing  
last call.  
Cancel dialing》  
Press and release the [] button the call is canceled.  
Voice dialing》  
(It depends on mobilphone’s voice dialing function)  
Press and release the [] button Say the telephone number (or  
voice tag) starting auto dialing.  
Answer a call》  
Press and release the [] button start to talk.  
End a call》  
Press and hold the [] button for 3 seconds the call is ended.  
Reject a call》  
(while phone is ringing)  
Press and hold the [] button for 3 seconds the call is rejected.  
Adjust speaker volume》  
Press and release the [] button volume up  
Press and release the [] button volume down  
Transfer/Switch Calls》  
(While talking on the headset)  
25  
 
BTHS02 User Manual  
Press and hold [] button for 3 seconds transfer the call to the  
mobile phone press and release [] button transfer the call back  
to headset.  
Mute the Microphone》  
Press and hold both [] and [] button for 3 seconds mute during  
a call.  
Press and hold both [] and [] button mute is canceled during a  
call.  
Connect with a PC or PDA》  
You are allowed to connect the headset with a Bluetooth enabled PC  
or PDA that is with Audio Gateway Profiles supported. Please refer  
to the user manual of your Bluetooth enabled PC or PDA for a setup  
information.  
26  
 
Wearing Headset  
BTHS02 User Manual  
5
There are 2 ways to wear the headset (either right or left side):  
Wearing the headset without ear hook》  
1. Directly place the headset into your ear without the ear hook.  
[Figure 1]  
Wearing the headset with a ear hook》  
1. Buckle the ear hook onto the headset.  
2.You may bend and adjust the hook to fit your ear, then gently place  
the ear hook onto your ear. (Figure 2, ex: wearing onto left ear.)  
3.You may take apart the ear hook and buckle the headset by the  
contrary way if you want to exchange to the right ear. (Figure 3)  
  
[Figure 2]  
  
[Figure 3]  
27  
 
Function Specification  
6
6.1 Charging the headset  
The headset comes with an embedded rechargeable battery. For first  
time use, it should takes about 4 hours to fully charge the battery. After-  
ward, it takes about 2 hours to fully charge.With battery fully charged,  
the talk time is about 6 hours, and the standby time will be about 160  
hours.  
1. Connect the DC Jack Connector with transferred connector as  
picture shown below.  
2. Connect the other side of transferred connector to the rechargeable  
port of the headset.  
3. Plug the charger into the socket of the power supply.  
4. Both red and green LEDs of transferred connector will light up.  
Charger  
Power  
Supply  
DC Jack Connector  
(Suitable for Nokia Mobilephone)  
Red (Green) LED  
* Note:  
1.When the red indicator of the headset starts to flash, it indicates that the  
headset is running low on battery. Charge the headset for 2 hours until the red  
indicator turns off.  
2.The headset doesn’t work while charging.  
28  
 
BTHS02 User Manual  
6.2 Power On/Off the headset  
Power On》  
Press and hold [] button for 4 seconds.While you see the LED flashes  
blue light for 4 times and hear two short high tones, release [] but-  
ton, then it will be powered on.  
Power Off》  
Press and hold [] button for 4 seconds.While you see the LED flashes  
red light for 4 times and hear two low tones, release [] button, then  
it will be powered off.  
6.3 Pairing  
You are required to pair the headset with your mobile phone or other  
devices before using it.  
1.The headset must be powered off before initiating pairing.To initiate  
pairing, press and hold [] button for 7 seconds until the blue and  
red indicators of headset are flashing alternatively. If you are wear-  
ing the headset during the pairing process, you will hear two short  
high tones when the headset is ready for pairing.  
2. Initiate pairing process of your mobile phone. Refer to the manual of  
mobile phone for detail process.You will see a new itemCG-BTHS02”  
added in your Bluetooth device list after searching process.  
3.You will be asked to enter pin-code to complete pairing. Please enter  
[1234] and confirm it.  
* Note:  
1. [1234] is the default pin-code.  
2.The red indicator of headset will turn off and the blue indicator will flash  
slowly after pairing completed successfully.  
3. If the headset is not in pairing mode, your mobile phone won’t find the  
headset. Please set the headset on pairing mode before the mobile phone  
search for the headset.  
4. If no pairing is possible for a period of time (approx. two minutes), the  
headset will automatically power off, and so the previous pairing (if any) is  
revoked.You may need to repeat steps 1 to 3 until pairing succeeds.  
29  
 
BTHS02 User Manual  
6.4 Making Calls  
Dial the number on the mobile phone as you usually do.  
6.5 Redial  
Press and hold [] button for 3 seconds to redial the last number you  
called.  
6.6 Voice Dialing  
Press [] button, waiting for a beep from headset and say the voice  
tag or the name of the person you want to call. Press [] button again  
to cancel voice dialing.  
* Note: It depens on the mobile phone which supports the function. And the  
name you said has been to saved as a voice tag in mobile phone contact  
listing.  
6.7 Answering a call  
When the headset is powered on and the mobile phone rings, you  
will hear a musical tone and the blue indicator will change to be quick  
flashing. Press [] button to answer the call.  
* Note: Due to the different design of some mobile phones, an auto-disconnect  
may happen even when the headset is powered on. In that case, the  
headset won’t ring when there is an incoming call. Press and release the []  
button to reconnect the headset with mobile phone for an incoming call.  
6.8 End a call  
End calls by pressing and holding [] button for 3 seconds or do  
nothing.  
6.9 Reject a call  
Press and hold [] button for 3 seconds to reject a call.  
30  
 
BTHS02 User Manual  
6.10 Transfer/Switch Calls  
Press and hold [] button for 3 seconds to transfer the call to mobile  
phone while talking on the headset. If you want to transfer the call  
back to headset, press [] button again.  
6.11 Adjust the headset Volume  
Press [] button for volume up or press [] button for volume down.  
6.12 Mute  
Press both [] and [] buttons in the same time for a Mute function.  
Press both [] and [] buttons in the same time again to disable the  
Mute function.  
6.13 Connect with a PC or PDA  
You are allowed to connect the headset with a Bluetooth enabled PC  
or PDA that is with Audio Gateway Profiles supported. Please refer  
to the user manual of your Bluetooth enabled PC or PDA for a setup  
information.  
31  
 
FAQ
7
Q1.Why doesn’t the headset work with my mobile phone after the head-  
set has been fully charged and switched on?  
Ans:You have to activate the Bluetooth function of your mobile phone  
first and pair it with the headset.  
Q2. Does the headset work with all types of mobile phones?  
Ans: No. It works only with Bluetooth enabled mobile phones.  
Q3. What is the operation distance between the headset and a  
Bluetooth mobile phone?  
Ans:The maximum operation distance can be up to 10 meters, however  
it will be affected and shortened by different circumstances and dif-  
ferent brands of mobile phones. Some mobile phones are with less  
operative distance.  
Q4.When my mobile phone was searching for the headset, why did  
several Bluetooth devices appear on my mobile phone?  
Ans: Most Bluetooth enabled mobile phones with Bluetooth function  
activated can search for more than one Bluetooth device within  
operative range.The headset will appear asCG-BTHS02” on your  
mobile phone after having been found by your mobile phone.  
Q5. Why can’t my mobile phone find the headset?  
Ans: If the headset is not in pairing mode, your mobile phone won’t find  
the headset. Please set the headset into pairing mode before start-  
ing your mobile phone to search for the headset. (Please refer to the  
User Manual for detailed instructions.)  
Q6. Do I need to pair the headset with my mobile phone every time I  
use it?  
Ans: No, once the Pairing is set up between the two devices, they will  
remain paired even when one or both devices are powered off.  
Q7. Why is there a disturbance noise coming from the headset?  
Ans:Whether your mobile phone is in a good signal area. If your mobile  
phone is in weak signal area, you won’t hear clearly with the headset.  
32  
 
BTHS02 User Manual  
Q8. What should I do when I can’t hear very well with the headset?  
Ans: Adjust the sound volume on your mobile phone, or press the []  
button of the headset to make volume up, or check if your mobile  
phone is in a good signal area.  
Q9. Why doesn’t the headset work suddenly?  
Ans:  
1) The headset may have run out of battery. When it is in low battery, a  
red LED will start to flash.  
2) Some Bluetooth mobile phones have a problem with the Bluetooth  
implementation, will occasionally but not often, get into an  
Bluetooth shut-down status in unpredictable circumstances.When  
this happens, please restart your mobile phone. (It is not necessary  
to perform Pairing again.)  
Make sure that your phone has the latest version of firmware loaded  
onto it. Please check the website of your mobile phone for new  
firmware.  
Q10.Why doesn’t the voice dialing function work with the headset?  
Ans:You may have to record the voice tag with the headset to your  
mobile phone. So that it can make sure the voice or number you said  
is right to correspond with the voice tag.  
33  
 
Compatiable Listing  
8
Compatible Mobile Phones Listing as below:  
Brand name  
Nokia  
Model name  
6310  
3650  
7280  
A760  
3660  
7610  
A780  
6230  
8910  
E398  
6260  
6310i  
V501  
6600  
V525  
6670  
V600  
6820  
8910i N-Gage  
E680 V3  
Motorola  
V600i  
MPX220 V80  
Sony  
K700i  
Z600  
P800  
T68i  
P900  
P910i S700i  
T39  
T610  
T630  
T68  
Ericsson  
Brand name  
Panasonic  
Sharp  
Model name  
X700 X88  
Brand name  
Model name  
S65 SX1  
X70  
Simens  
BenQ  
Philips  
O2  
S55  
P30  
GX-15 GX-30 GX-31  
Sagem  
My-X8  
575  
D535  
XDA2  
Dopod  
asia.com.  
34  
 
Specification  
BTHS02 User Manual  
9
Standard  
Bluetooth V1.1  
Generic Access (GAP),  
Service Discovery Application (SDAP),  
Headset (HSP),  
Bluetooth Profile  
Handsfree (HFP)  
Talk time: 6 hours  
Standby time: 160 hours  
Usage Time  
Frequency  
Spectrum  
RF Output Power  
2.4GHz~2.4835GHz ISM Band  
FHSS (Frequency Hopping Spread Spectrum)  
0 dBm(typical)  
Receiving Sensitivity -80 dBm(typical)  
Power Class  
Class 2  
Antenna Type  
PCB Antenna  
Up to 10M (open space)  
Cover Range  
* Environmental factors may adversely affect  
wireless signal range  
Battery Type:Li-ion polymer  
Capacity:160 mAh  
Nominal Voltage:3.7V  
Recharging Voltage:4.2V  
Recharging Current:100mA/5V DC  
Rechargeable  
Battery  
Security  
Pairing, 128bits Encryption Authentication  
Operation:30 mA  
Standby <1 mA  
Power Consumption  
Environment Requirements  
Temperature:0~40˚C  
Humidity:<90% (non- non-condensing)  
Tempterature:-20~60˚C  
Humidity:<95% (non- non-condensing)  
Operating  
Storage  
Physical Specifications  
26(W) x 24(D) x 60(H) mm  
13 g  
Dimension  
Weight  
Certification  
DGT,CE,FCC,BQB  
35  
 
memo  
 
memo  
 
 

Closet Maid Outdoor Storage 1095 31 User Manual
Continental Refrigerator Refrigerator SWF27 BS FB User Manual
Craftsman Saw 31510833 User Manual
Creative DJ Equipment PCA 6780 User Manual
Cuisinart Work Light PG 25400A User Manual
Danby Dehumidifier DDR3008EE User Manual
Field Controls Network Router TB 1 User Manual
Gaggenau Ventilation Hood AH 600 190 User Manual
Geemarc Telephone Marbella User Manual
GE Mouse HO97859 User Manual